The Missing Link in Your FPV SetupYour goggles have a single 3.5mm AV port. Your ground station has three RCA jacks. Your DVR needs separate video and audio inputs. Your external monitor expects RCA. How do you connect them all? This Eachine 1.5m AV Cable is the universal translator -- a single 3.5mm male plug splitting into three standard RCA connectors (Video, Left Audio, Right Audio). No adapters. No signal converters. No compatibility guesswork. Just plug 1n and go.Three RCA Heads. Three Signals. One Cable.Each RCA connector is color-coded and clearly labeled:- Yellow (Video): Transmits the composite video signal from your receiver to goggles, monitor, or DVR.- Red (Left Channel): Carries the left audio channel from your AV source.

- White (Right Channel): Carries the  rightaudio channel from your AV source.

Whether you're outputting FPV footage to an external screen, recording flights on a standalone DVR, feeding a projector for spectator viewing, or inputting a simulator feed to your goggles—this cable handles all three signal paths simultaneously.1.5 Meters of FlexibilityAt 1.5 meters (approximately 5 feet) , this cable gives you enough reach to set up a comfortable ground station without being tangled in excess wire. Position your DVR on the table. Mount your monitor on a tripod. Keep your goggles connected while moving around the pit. The length hits the sweet spot between flexibility and signal integrity.Universal CompatibilityThe 3.5mm to 3 RCA configuration is one of the most widely used AV connection standards in FPV and consumer electronics. This cable works with:- FPV Goggles: Eachine EV100 and any goggle with a standard 3.5mm AV port- Receivers: External VRX modules, ground station receivers- Monitors: External FPV screens, field monitors with RCA inputs- DVRs: Standalone digital video recorders with RCA inputs- Projectors: For spectator viewing at race events- STBs (Set-Top Boxes): AV input/output for media devices Important: Verify your device's 3.5mm AV port pinout before connecting. While most FPV goggles and receivers use a standardized AV pinout, some manufacturers may use proprietary configurations. This cable follows the standard Video-Left-Right pinout matching Eachine and most major FPV brands.Built as a Spare. Used as a Lifesaver.AV cables get lost. They get pinched in case latches. They get borrowed by a fellow pilot and never returned. At this price, buy one for your main setup and one for your field bag. When your video feed depends on a single cable, redundancy isn't paranoia—it's preparation.Features

* 3.5MM TO 3 RCA CONFIGURATION: One male 3.5mm DC jack plug splits into three standard RCA connectors—Video (Yellow), Right Audio (Red), Left Audio (White).* 1.5M (5FT) CABLE LENGTH: Optimal reach for ground station setups. Long enough for comfortable positioning. Short enough to minimize signal degradation and cable clutter.* UNIVERSAL COMPATIBILITY: Works with FPV goggles (EV100 and others with standard AV ports), multi-receivers, external monitors, DVRs, projectors, STBs, and any device using standard 3 RCA AV input/output.* AUDIO + VIDEO SIMULTANEOUS: Transmits composite video and stereo audio (dual channel) through a single 3.5mm connection. No separate audio cable needed.* COLOR-CODED RCA CONNECTORS: Yellow/Red/White standard color scheme for instant, error-free connection identification.* PLUG-AND-PLAY: No drivers. No configuration. No power supply. Just connect and the signal flows.* ESSENTIAL FIELD SPARE: Lightweight and compact. Keep one in your kit bag. A missing or damaged AV cable shouldn't end your flying day. Specification

  

1 x Eachine 3.5mm Jack Male to 3 RCA AV Input Output Video Cable (1.5m)